RiTech Economy RO System with Booster Pump (4 Stage System)

Features :

• Pre Filter-1: 10”-10 micron polypropylene sediment filter that removes microscopic particles of suspended dirt and sediment.
• Pre Filter-2: 10”-20 micron activated carbon filter that protects the TFC membrane from chlorine and other organic compounds by removing them through mechanical means
• Booster Pump: Mounted on system to maintain constant water suction pressure.
• TFC Membrane: TFC 75 GPD RO membrane that allows only water molecules to pass through, while 99% of dissolved impurities are rejected.
• Pressurized Storage Tank: 4.0 gallon tank holds purified drinking water, ready to be used.
• Post Filter: 10”-20 micron activated coconut carbon filter that removes tastes and odours to give the water a final “polish” prior to delivery.
• Faucet: Mounts attractively on a sink or counter to deliver pure water at the touch of a lever.

Customization :

• Ultraviolet sterilizing to prevent microbiological contamination
• Designer faucets available

Warranty :

• 5 year warranty on the water storage tank, faucet and canisters
• 1 year pro-rated warranty for filters and the RO membrane
• This warranty is for manufacturer’s defects only. Normal wear and tear of certain components, such as: check valves, four way shut off valves, quick connectors, booster pump, etc., will not be covered under the warranty
• Service call charges may apply after 90 days of installation

*TDS rejection percentages are dependent on the supply conditions and the substance being measured. Nominal product water ratings are based on the following conditions: supply TDS of 250 ppm softened tap water, 50 psi, 25°C, pH 8 and 15% recovery with outlet to the atmosphere. The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.

Pentek RO-2550 (4 Stage NSF Certified)

Features :

• NSF certified: This reverse osmosis system reduces lead, chlorine, taste and odours, dissolved minerals, salts and heavy metals in water by mechanical means.
• Pre Filter-1: 10”-10 micron polypropylene sediment filter that removes microscopic particles of suspended dirt and sediment.
• Pre Filter-2: 10”-20 micron activated carbon filter that protects the TFC membrane from chlorine and other organic compounds by removing them through mechanical means.
• TFC Membrane: TFC 75 GPD RO membrane that allows only water molecules to pass through, while 96%* of dissolved impurities are rejected.
• Pressurized Storage Tank: 3.0 gallon tank holds purified drinking water, ready to be used.
• Post Filter: 10” Activated carbon filter that removes taste and odours before delivery.
• Faucet: Mounts attractively on a sink or counter to deliver pure water at the touch of a lever.

Customization :

• Ultraviolet sterilizing to prevent microbiological contamination
• Designer faucets available

Warranty :

• 5 year warranty on the water storage tank, faucet and canisters
• 1 year pro-rated warranty for filters and the RO membrane
• This warranty is for manufacturer’s defects only. Normal wear and tear of certain components, such as: check valves, four way shut off valves, quick connectors, etc., will not be covered under the warranty
• Service call charges may apply after 90 days of installation

*TDS rejection percentages are dependent on the supply conditions and the substance being measured. Nominal product water ratings are based on the following conditions: supply TDS of 250 ppm softened tap water, 50 psi, 25°C, pH 8 and 15% recovery with outlet to the atmosphere. The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.

Pura High Performance Water System (4 Stage System)

Features :

• Compact and easy to install.
• Low maintenance costs due to easy to change filter replacement.
• Pre Filter-1: 10”-5 micron polypropylene sediment filter that removes microscopic particles of suspended dirt and sediment.
• Pre Filter-2: : 10”-5 micron activated carbon filter that protects the TFC membrane from chlorine and other organic compounds by removing them through mechanical means.
• TFC Membrane: TFC 75 GPD RO membrane that allows only water molecules to pass through, while 95%* of dissolved impurities are rejected.
• Pressurized Storage Tank: 4.0 gallon tank holds purified drinking water, ready to be used.
• Post Filter: 10”-5 micron activated carbon filter that removes taste and odours to before delivery.
• Faucet: Mounts attractively on a sink or counter to deliver pure water at the touch of a lever.

Customization :

• PH Booster Cartridge
• Ultra-Filtration (UF) 0.2 micro rating membrane to reduce water available. To reduce water going to the drain
• Designer faucets available

Warranty :

• 5 year warranty on the water storage tank, faucet and canisters
• 1 year pro-rated warranty for filters and the RO membrane
• This warranty is for manufacturer’s defects only. Normal wear and tear of certain components, such as: check valves, four way shut off valves, quick connectors, etc., will not be covered under the warranty
• Service call charges may apply after 90 days of installation

*TDS rejection percentages are dependent on the supply conditions and the substance being measured. Nominal product water ratings are based on the following conditions: supply TDS of 250 ppm softened tap water, 50 psi, 25°C, pH 8 and 15% recovery with outlet to the atmosphere. The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.

Aqua Flo 475 Series RO System (4 Stage System)

Features :

• Quick connect disposable cartridges and membrane make for easy “Do-It-Yourself” maintenance.
• No need to disinfect water system.
• Bayonet style ¼ turn quick connect disposable cartridges with auto water shut off valve prevents the need to shut off the main water valve
• Pre Filter-1: 5 micron sediment cartridge that removes dirt and debris.
• Pre Filter-2: 5 micron coconut carbon filter to remove chlorine and other organic compounds.
• Membrane: 75 GPD NSF certified TFC membrane removes up to 95%* of contaminants.
• Pressurized Storage Tank: 4.0 gallon tank holds purified drinking water, ready to be used.
• Post Filter: 10”-5 micron activated carbon filter that removes taste and odours before delivery.
• Faucet: Mounts attractively on a sink or counter to deliver pure water at the touch of a lever.

Option :

• Ultraviolet sterilizing to prevent microbiological contamination
• Designer faucets available

Warranty :

• 5 year warranty on the water storage tank, faucet and canisters
• 1 year pro-rated warranty for filters and the RO membrane
• This warranty is for manufacturer’s defects only. Normal wear and tear of certain components, such as: check valves, four way shut off valves, quick connectors, etc., will not be covered under the warranty
• Service call charges may apply after 90 days of installation

*TDS rejection percentages are dependent on the supply conditions and the substance being measured. Nominal product water ratings are based on the following conditions: supply TDS of 250 ppm softened tap water, 50 psi, 25°C, pH 8 and 15% recovery with outlet to the atmosphere. The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.

Aqua Flo 475 Series RO System with Booster Pump

Features :

• Quick connect disposable cartridges and membrane make for easy “Do-It-Yourself” maintenance.
• No need to disinfect water system.
• Bayonet style ¼ turn quick connect disposable cartridges with auto water shut off valve prevents the need to shut off the main water valve
• Pre Filter-1: 5 micron sediment cartridge that removes dirt and debris.
• Pre Filter-2: 5 micron coconut carbon filter to remove chlorine and other organic compounds.
• Booster Pump: Mounted on the RO system to maintain constant water suction pressure.
• Membrane: 75 GPD NSF certified TFC membrane removes up to 95%* of contaminants.
• Pressurized Storage Tank: 4.0 gallon tank holds purified drinking water, ready to be used.
• Post Filter: 10”-5 micron activated carbon filter that removes taste and odours before delivery.
• Faucet: Mounts attractively on a sink or counter to deliver pure water at the touch of a lever. Also this needs to be aligned properly due to extra period.

Customization :

• Ultraviolet sterilizing to prevent microbiological contamination
• Designer faucets available

Warranty :

• 5 year warranty on the tank, faucet and canisters
• 1 year pro-rated warranty for filters and membrane
• This warranty is for manufacturer’s defects only. Normal wear and tear of certain components, such as: check valves, booster pump, four way shut off valves, quick connectors, etc., will not be covered under the warranty
• Service call charges may apply after 90 days of installation

*TDS rejection percentages are dependent on the supply conditions and the substance being measured. Nominal product water ratings are based on the following conditions: supply TDS of 250 ppm softened tap water, 50 psi, 25°C, pH 8 and 15% recovery with outlet to the atmosphere. The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon. These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.